- This new head up display project a 5.5” Multi color design that makes the screen easier to read, highlighting important details for quick viewing
- Equipped with smart nanotechnology to eliminate unwanted reflections making the information easier to read, with Automatic and manual brightness adjustment mode
- Ability to display essential car statistics including: speed, engine rotational speed, water temperature, battery voltage, instantaneous fuel consumption, average fuel consumption, mileage measurement, shift reminder, fatigued driver reminder, low voltage alarm, high temperature alarm, speed alarm, with ability to change speed units. Km / mile
- Wide Compatibility: Suitable for most cars with OBD2 and EUOBD standard, plug and play ports
HUD head up display main features
Plug and Play connectivity with any OBDII or EUOBD capable vehicle;
5.5”, 5 color display;
Multi color design makes the screen easier to read highlight important details for quick viewing;
The use of nanotechnology to eliminate unwanted reflections making the information easier to read
Driving mileage and consumption
Auto power on and off with the vehicle
Automatic and manual brightness adjustment mode
- If you have Inaccurate speed:
Open the HUD, press and hold the waveform button vertically for 5 seconds to enter the menu. The menu displays 0. The default value is 107. adjust setting buttons change the value until the HUD displays the same data as the dashboard. Press and hold the button vertically for 5 seconds to save.
- How to switch speed units
Turn on the HUD, press and hold the setting button vertically for 5 seconds to enter the menu. The menu displays 0, short press 10 times, the default value is 1 for KM, adjust setting buttons change the value, 2 is MPH, then Press and hold the waveform button vertically for 5 seconds to save.
Automatic and manual brightness adjustment mode,Nanotechnology to eliminate unwanted reflections making the information easier to read
1 x HUD
1 x OBD Cable
1 x Non-slip Mat
1 x Reflective Film
1 x User Manual
Ensure your vehicle is OBDII compatible or EUOBD. a.Check around the area under the steering wheel for an OBD plug b.Contact your vehicle manufacturer or search online c.Open the bonnet and look for a OBDII compatible sticker.
When the HUD is connected to the car, please do not start the engine. Turn your car on but do not start the engine. Have the HUD turned off. Press the downside key for 5 seconds and you will hear a ‘tick’ sound, which means that the HUD is back to factory settings.
How To Instal:
Several car brand or model with cover in OBD infterface,it may not close the cover after connect the HUD plug.For this,you can push the snap of OBD interface in. Then you can connect the HUD plug inside and you can close the cover now,fixed the interfaces in certain position.
1.Find the car's 16-pin diagnostic socket, connecting the OBD II cable to the 16-pin diagnostic socket if it has this socket.
2.Put the non-slip pad onto the instrument pane, then put HUD on the non-slip pad, you can adjust the angle.
3.The reflective film may be affixed to the forward position of HUD and stick to the front windshield, ensuring that the information, such as car speed can be projected to the reflective film.
No Screen Display,No Electricity.
Reason:Start the car engine;check if the OBD line connection is tight;pls try more times;check if HUD switches on. If no display still,suggest change another car to test
Start the car engine, but the screen only shows the car voltage, automatic turn off after 30 seconds.
Reason:OBD2 system HUD does NOT work for DODGE,Jeep,Mazda,Suzuki,France car(Peugeot,CitroenRenaultBugatti,DS,Dacia）Italy cars（Lamborghini,Fiat,Maserati,Alfa Romeo,Ferrari,Pagani ,Faralli Mazzanti）some KIA and Hyundai,all American made before 2004 year, all Japanese cars made before 2007 year.OBD I and J-OBD Car not be supported.
Read not clearly under sunlight,has double image.
Check whether the protect film has been torn or not on HUD,and then stick the reflection film on the front windshield which in gift box.
Vertically long press wave button for 5 seconds enter into Menu, short press 8 times until menu display shows 8, downside 2 times to second parameter setting,then vertically press for 5 seconds to save it.
Switch on HUD,vertically long press the wave button for 5 seconds enter into Menu, menu shows 0, the default value is 107, and up or down the wave button to increase or decrease the value, until HUD shows the same with dashboard datas,vertically long press the wave button for 5s to save and exist.